Kodlin Lowering-Kit for Harley-Davidson M8 Softail models with remote pre-load adjuster

So been riding Harleys for over 25 years and always like to lower them. I am 5 foot 9 inches so reaching the ground is not an issue. I just like the lowered look. I think this has to be one of... So been riding Harleys for over 25 years and always like to lower them. I am 5 foot 9 inches so reaching the ground is not an issue. I just like the lowered look. I think this has to be one of the best product I ever have come across. Fits like a glove, lowered the bike one inch, simple to install. But you will need a spring compression tool to make the job easy. Great product and don't think you could go wrong installing this but you will need a spring compression tool or do as I did and made up my own.

Installed the eyelet this weekend and its awesome. Took less then 45 min instructions clear minimal tools. Set the shaft set nut all the way down as it is adjustable and is perfect for me 5'6... Installed the eyelet this weekend and its awesome. Took less then 45 min instructions clear minimal tools. Set the shaft set nut all the way down as it is adjustable and is perfect for me 5'6" 29 inseam. Now I can enjoy my new seat and plant me feet!

Took me about two hours from actual start to finish, this is one of the modifications that doesn't need to be over thought. Remove your old parts and put this one in period. I measured the hei... Took me about two hours from actual start to finish, this is one of the modifications that doesn't need to be over thought. Remove your old parts and put this one in period. I measured the height to the old bearing on center before I installed the kit. I set mine for a 20mm drop.

Hello, I have a 2018 Breakout 114. Damn, that is one Ugly Bike. Not my style at all. Previous owner had House of Thunder (Morgan Hill,CA) put in a Cam, SE Slipons, forward kicks, and a Tune. That ... Hello, I have a 2018 Breakout 114. Damn, that is one Ugly Bike. Not my style at all. Previous owner had House of Thunder (Morgan Hill,CA) put in a Cam, SE Slipons, forward kicks, and a Tune. That part was great, but the 16” bars didn’t do it for me. On to the Lift,..... Swapped out the tank for a 2018 5 gallon (2018 FatBoy) and a BobTail Fender from an 09 CVO. And, to add some WildSide, an FX Springer. Springers are “De-Raked” from HD, so, changed out the Stem and Top Plate from Vulcan. Now, it’s inline and Raked. That lowers the front 1.5”. Started shopping for a Rear Lowering Kit. There are a few options.; cut the damper tube, Shorter shock, Air Suspension, OffSet Bracket, or change a “Fitting” on the Mono Shock. I really wanted to drop it 1.5” I found Kodlin, ordered it.... Then the owner contacted me (now there’s some Class) we emailed back n forth, swappin pics. Then, I ordered the Kodlin Fender. They both got here real fast. I opened the boxes, and thought WOW, now There’s some Quality!! I’m waiting for Kodlin to get more of there new ideas on the site, and I’ll buy those too. I have a “Build Page” on HDForums if you wanna see my progress. https://www.hdforums.com/forum/2018-softail-models/1324402-2018-breakout-114-into-an-09-springer-softail-help.html

Great part - great service!

Perfect. Ordered last week Monday and got it on Wednesday. Took me 2 hours to install it on Saturday and spent the weekend riding. Great fit and the look I was after. This is the real deal

I am so glad I found you on FB. Finally lowered my 2019 Fat Boy. Your product is superb but the stock spring was more difficult to get off than what I expected. Not your fault but it made the whole ex... I am so glad I found you on FB. Finally lowered my 2019 Fat Boy. Your product is superb but the stock spring was more difficult to get off than what I expected. Not your fault but it made the whole experiece a 4 and not a 5. I just saw that you are offering a tool for it. Should have looked for it

Put this on yesterday and couldn't be happier. Gave it the look I was after. I would definitely recommend!

Easy, no fuss kit. Unit is one piece and bearing is pre-pressed. No cutting of the shaft required. What an easy, affordable and great looking upgrade. Well engineered. Thank you!